Home > HV-IGBT drivers >

dual HV-IGBT driver core,Suitable for 3300V dual IGBTs,application High power UPS, SVG

Product Categories

3-level HV-IGBT Drivers [18]
IGBT driver [29]
3-level IGBT Driver Core [8]
ALCON capacitance [3]
E series IGBT driver core [13]
IGBT driver circuit [1]
High Power IGBT Driver [7]
SVG / SVC [1]
application Wind power generation、Inverter、Converter、Welding machine &cutting、Induction heating、Trac [1]
HV-IGBT drivers [34]
IGBT driver, thyristor , diode [2]
Parallel Resonant Driver [1]
Plug & Play IGBT Driver [5]
Thyristor Driver [2]

BEIJING POWER-SEM ELECTRONIC TECHNIQUE CO. LTD.

Contact Now

dual HV-IGBT driver core,Suitable for 3300V dual IGBTs,application High power UPS, SVG

Place of Origin : Beijing, China

Brand Name : power-sem

Model Number : PSHI 0822-33

MOQ : 1pcs

Contact Now

1.feature

● ASIC dual HV-IGBT driver core
● Suitable for 3300V dual IGBTs
● Half-bridge mode select,also two independent single drives
● Short circuit and over current protection by V_CEsatmonitoring
● Isolation due to nanometer amorphous transformer
● Supply undervoltage protection (<12.5V)
● Error memory
● Error “soft turn-off”
● Dynamic spike restrain
● Driver interlock top/bottom in half-bridge mode
● Dead time adjustable
● Internal isolated DC/DC power supply
● ±25 Apeak current output
● IGBT gate drive voltage +15V/-9V
● gate drive voltage monitoring(<12.5V,>-7.5V)
● 650ns signal conversion time
● 110ns error signal feedback time
● 400ns narrow pulse inhibit eliminate radio frequency interference
● Max. working frequency 10kHz
● Error chain function, low level active
● Clearance distance from primary side to secondary side is 35mm

2.parameter

PSHI 0822-33

Absolute Maximum Ratings (Ta=25℃)

Symbol	Term	Values	Unit
V_{S MAX.}	Max. supply voltage primary	+16	V
I_{S MAX.}	Max. supply current primary	550	mA
P_DC/DC	Total power of DC/DC isolation power output	8	W
V_in+	Max.PWM input level (V_inA; V_inB)	V_S+0.5	V
V_in-	Min.PWM input level (V_inA; V_inB)	GND-0.5	V
V_iH	Max. logic signal input voltage (mode select /reset signal and external error )	V_S+0.5	V
I_OC	Max. logic signal output current (Open-collector output current)	10	mA
I_outAV	Output average current per channel	150	mA
I_outPEAK	Output peak current per channel	±25	A
V_CES	IGBT collector-emitter voltage	3300	V
V_{isol IO}	Isolation voltage IN-OUT(5 sec. AC)	8000	V
V_{isol AB}	Isolation voltage IN A-OUT B(5 sec. AC)	6000	V
R_{Gon/off min}	Minimal R_gon/R_goff	1	Ω
Q_out/pulse	Charge per pulse	±10^①	μC
dv/dt	Rate of rise and fall of voltage	75	kV/μs
f_{SW max}	Max. working frequency	10	kHz
T_op	Operating temperature	-40...+85	℃
T_stg.	Storage temperature	-45...+85	℃

Electrical Characteristics (Ta=25℃)

Symbol	Term	Parameter				Unit
Symbol	Term	Min.	Typ.	Max.	Rec.	Unit
V_S	Supply voltage primary	14.5	15	15.5	15	V
I_S	No-load current primary f_SW=0 f_SW=10kHz		80 100			mA
V_IT+	Input high level: 15V level 5V level	12 3.2				V
V_IT－	Input low level: 15V level 5V level			4.5 1.9		V
R_in	Input resistance		33			kΩ
V_G(on)	Turn-on gate voltage		+15			V
V_G(off)	Turn-off gate voltage		-9			V
t_d(on)IO	IN-OUT turn-on delay time		650			ns
t_d(off)IO	IN-OUT turn-off delay time		600			ns
t_d(err)	Error signal return delay time V_CEerror happen-error signal output		110			ns
t_md	Narrow pulse restrained		400			ns
V_CEstat	Reference voltage for V_CEmonitoring	20		40	35	V
V_Level	Logic level (External error input; reset signal; mode select)		+8		+15	V
t_pReset	V_ininput both Low reset time		10			μs
t_TD	Dead time adjusted from factory (half-bridge interlock mode)	.05^②	5			μs
C_PS	Primary to secondary capacitance		10			pf

① This value can be expanded externally (on adapter board )by pins.

② Attention! Pins X_S.8,9 should not connect to power supply V_Sor GND directly, Min.R_TDis 1kΩ and corresponding t_TDis about 0.05μs.

3.application

● Single or bridge circuit
● Medium-voltage converter
● SVG
● Inverter
● High power UPS
● High power high frequency SMPS

Product Tags:

IGBT driver

dual HV-IGBT driver core,Suitable for 3300V dual IGBTs,application High power UPS, SVG Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	BEIJING POWER-SEM ELECTRONIC TECHNIQUE CO. LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!